There were 4 different holes drilled. I started with the jack hole. This was made for the hole to plug an amp into.
After drilling the jack hole I used the jack hole to run an extra long but through to the next that went from electronics pocket to the pickups pocket.
Circled in blue is where the extra long but came from through the jack hole. This hole is for the wires to connect to the electronic pocket. I then used the long bit again to make the holes made that are circled in purple. These are to bring the wires from the pickups to the electric pocket. Last is the green circled hole. This is for a ground wire to sit under the bridge and touch the metal.
Cosntructeur de Guitare Bryce 